Specialty Equipment

The Linde Series 206-D Controller is a versatile automatic shutdown controller for any gas handling system. The standard controller unit offers warning and warning with shutdown, indication for all of its inputs, and a touch screen interface for visual indication of alarms. Almost every aspect of the controller system can be tailored to the customer’s specifications, including inputs, outputs, visual display, annunciation, and shutdown control. ::: F206D Controller Brochure

The Series 6400 Gas Detector warns users of hazardous chemicals detected in the atmosphere. When incorporated with an emergency shutdown system, the Series 6400 Gas Detector can turn off the supply of hazardous gas immediately after a leak is detected. The Series 6400 Gas Detector is a simple to use, all-in-on gas detector. This gas detector comes pre-calibrated and ready to plug in, with sensors and receiver / alarm modules.  An auto-test option is also available. ::: F6400 Gas Detector Brochure

The Model 9900B 4 and Model 9900B 8 Point Annunciators provide remote isolated audible and visual indication of various types of process conditions. The multi-channel annunciators are best suited in manufacturing facilities, high gas use facilities, and "No Down Time" production lines. ::: F9900 Series Annunciators Brochure

Linde's Series 2400 Automatic Changeover Regulator Systems provide a reliable uninterrupted supply of gas to a gas pipeline system in an industrial installation. The Changeover System consists of a manifold control and two supply bank headers, one service and one reserve supply, to provide an uninterrupted supply of gas for the specific gas application. ::: F2400 Series Brochure

 Linde's 2500 series are designed to regulate and monitor vaporized gas from cryogenic cylinders. The system automatically changes over when the primary cylinder bank is depleted. Simply rotate the control lever to reset the unit. ::: F2500 Series Brochure

Linde's 2701 series medical gas changeovers provide fully automatic system control. An integrated circuit board monitors cylinder bank pressure electronically, controlling changeover and eliminating the need to manually reset levers or valves. ::: F2701 Medical Gas Changeovers Brochure

Linde's 7900 and 7910 semi-automatic changeover system is designed to allow the user to replace expended gas cylinders while maintaining a continuous gas supply to the point of use. ::: F7900 Series Semi-Automatic Changeover System Brochure

The Linde protocol station assembly is specifically designed for safe and convenient wall and / or panel mounting for all of Linde’s single and double stage brass and stainless steel gas regulators. ::: CEMS Protocol Station Brochure

All of the regulators offered by Linde's Environmental Division are engineered and manufactured to provide you with the optimum equipment for your specific application, so deciding which regulator to order for criteria pollutant analysis is simple.

First, you consider the following:
- Single or double stage?
- Brass or stainless steel?
- Helium or hydrogen in the cylinder?

Then, you select your desired delivery pressure (2-50 psig or 1-125 psig), outlet connection (¼” compression fitting or ¼” NPTM), and the proper CGA connection. ::: Gas Regulators Brochure

Eliminate high pressure hydrogen cylinders from the laboratory and generate a continuous source of ultra high purity (UHP) hydrogen gas using de-ionized water and electricity. ::: H2 Gas Generators Brochure

Eliminate high-pressure nitrogen cylinders from your facility and generate a continuous source of high purity nitrogen gas from a compressed air supply. ::: N2 Gas Generators Brochure

These kits are designed to provide OEM customers with high quality gas calibration standards in an easy to carry, easy to use format. The gas standards are supplied in light weight, high pressure, reusable aluminum cylinders containing 170 liters of gas. ::: OEM Calibration Kits Brochure

By simply connecting to a clean, dry compressed air supply, the Linde Zero Air Generator will remove hydrocarbons from the air, making it ideal for use in FID applications. ::: Zero Air Generator Brochure

Linde's F5300 Series Room Air Purifier is designed to scrub the toxic exhaust gas in a 3000 cubic foot (85 cubic meter) room or the toxic exhaust gas that leaves the Model 4007 gas cabinet through the six inch flue. The room air purifier is designed to meet UL and NEC electrical codes. The room air purifier includes replaceable filter elements with an activated charcoal bed for fluorine gas and fluorine compound removal, a 1,000 CFM centrifugal blower rated at 20,000 hours of continuous operation, remote control and safety interlock interfacing, and is housed in an all white, gas tight cabinet enclosure. ::: 5300 Series Room Air Purifier Brochure

The Series F5100 Halogen Gas Scrubbers use activated alumina or activated charcoal to scrub the user’s vent gases. These scrubbers can be used in a stand alone configuration or inside a vented cylinder cabinet. Excimer laser processes and light bulb manufacturing are typical applications for these units. An optional excess flow switch can be assembled at the inlet of the scrubber to prevent a sudden flow surge into the scrubber media. ::: F5100 Series Halogen Gas Scrubber Brochure

The F5200 Series Ventilation Scrubber is designed to scrub the end user’s vent gases. The scrubber consists of a special activated carbon adsorber and a fiberglass pre-filter placed just upstream of the adsorber for removal of dirt and dust contaminants. Both the adsorber and pre-filter are enclosed together in a steel housing within the scrubber. ::: F5200 Series Ventilation Scrubber Brochure

The F1100 series gas delivery process panels are designed for use in High Purity systems where corrosive and toxic gas levels reach 20% of the mixture. ::: F1100 Series Gas Delivery Panels

Linde's F1200 series gas fill panels are designed for use in High Purity systems where inert gases are introduced as a buffer ::: F1200 Series Gas Fill Panels Brochure

The F1300 series gas purge panels are designed for use in High Purity systems where an inert gas is required to purge the process panel as well as the process equipment. ::: F1300 Series Gas Purge Panels Brochure

Linde's 1400 / 1401 series gas delivery combination purge/fill is designed for use with inert gases in High Purity. The F1400 panel provides the user with an inert purge panel configuration (lower regulator assembly) along with a rare gas buffer assembly mounted on the same panel.  ::: F1400 Series Gas Purge/Fill Combo

This xenon recovery system is a manual system designed to be used with 27500-liter chamber, filled with 3000 liters of xenon at NTP. Recovery operation is estimated to take 14-18 hours. ::: All Purpose Xenon Recovery System Brochure

Primary components of the xenon loading equipment (XLE) are compressor, vacuum pump, high precision weight scale (0.02 kg accuracy), after cooler, and pre-heater. Maximum operating pressure is 2700 PSIG (186 Bar G). Estimated overall size/ weight is 2.5m high x 2.5m wide x 2.0m deep at 1000 kg. ::: Xenon Transfer & Recovery System Brochure

The F7000 Series Protocol Station Gas Regulator Assembly is specifically designed for the safe and convenient wall and / or panel mounting for almost all of Spectra Gases' high purity single and double stage brass and stainless steel gas regulators. ::: F7000 Series Protocol Station Gas Regulator Assembly Brochure

The F7130 Series brass, single stage, high purity regulators are recommended for non-corrosive analytical and process applications where precise flow control is not critical. A specially designed, convoluted, stainless steel diaphragm provides good regulating performance and maximum purity integrity without the need for a soft seal, which often can be a source of contamination. Each regulator is capable of withstanding an internal purging and is provided with a diffusion-resistant, diaphragm-packless outlet valve to maintain system purity. The optional bonnet vent adaptor allows for the venting of hazardous gases in the event of diaphragm failure. ::: F7130 Series Brass Single Stage High Purity Regulators Brochure

The F7140 Series two stage, high purity regulators are designed for non-corrosive analytical and process applications requiring precise, stable delivery pressure control. The two stage design yields a delivery pressure change of less than 0.04/100 psi inlet change. The regulators' convoluted stainless steel diaphragms provide excellent regulating characteristics and allow for internal purging. The metal-to-metal diaphragm seal prevents contamination by eliminating the need for a soft seal, and provides a leak-rate design of less than 2 x 10-8 ccs helium. This minimizes cleanup time when purging and yields lower residual contaminant levels. ::: F7140 Series Two Stage High Purity Regulators Brochure

The F7210 Series stainless steel, single stage, high purity regulators are recommended for corrosive analytical and process applications where precise flow control is not critical. A specially designed, convoluted, stainless steel diaphragm provides good regulating performance and maximum purity integrity without the need for a soft seal, which often can contaminate the system. Each regulator is capable of withstanding an internal purging and is provided with a diffusion-resistant, diaphragm-packless outlet valve to maintain system purity. These regulators are ultrasonically cleaned for high purity service. ::: F7210 Series Stainless Steel Single Stage High Purity Regulators Brochure

The F7220 Series two stage, high purity regulators are designed for corrosive analytical and process applications requiring precise, stable, delivery pressure control. The two stage design yields a delivery pressure change of less than 0.04/100 psi inlet change. Convoluted stainless steel diaphragms provide excellent regulating characteristics and allow for internal purging. The metal-to-metal diaphragm seal prevents contamination by eliminating the need for a soft seal, and also provides a leak-rate design of less than 2 x 10-8 ccs helium. This minimizes cleanup time in purging and yields lower residual contaminant levels. ::: F7220 Series Two Stage High Purity Regulator Brochure

The Series F9000 and F9010 Gas Regulator Towers are designed to meet the requirements of today’s instrument intense laboratories where space for analytical instrumentation is a paramount concern. The Towers will satisfy the demand for multiple “Point of Use” gas services in critical arenas. Both Series F9000 and F9010 Gas Regulator Towers are capable of supporting up to 20 gas regulator outlets for “Point of Use” gas distribution. ::: F9000 Series Gas Regulator Towers Brochure

The Series 9500 and 9510 Gas Regulator Towers are custom designed to accommodate a maximum of 10 individual panel assemblies which can be flush mounted into each tower. The Series 9500 and 9510 Gas Regulator Tower Panels can be equipped with either brass components (Series 9500) or stainless steel components (Series 9510). ::: F9500 Series Gas Regulator Towers Brochure

The 1600 / 1601 Series Gas Delivery Combination Purge / Fill is designed for use with high purity inert gases. The F1600 panel provides the user with an inert purge panel configuration (lower regulator assembly) along with a rare gas buffer assembly mounted on the same panel. ::: F1600 Series Gas Delivery Purge/Fill Combo Brochure

Linde's 1710 Series Gas Delivery Purge Panel is designed for use with inert gases in ultra high purity (UHP) applications. This panel offers a three valve configuration which includes a low pressure vent valve. The 1710 Series panel is constructed with all stainless steel components using orbital welded construction and VCR style fittings. ::: F1700 Series Gas Delivery Purge Panel Brochure

Linde's F1900 Series Gas Delivery Process is designed for use with corrosive gases in ultra high purity (UHP) applications.  Construction is fully welded, face seal fittings for optimal leak integrity.  Optional configurations may include pressure transducers, excess flow switches and vacuum venturi to ensure a more efficient purge process. ::: F1900 Series Gas Delivery Process Brochure

Linde's gas safety cabinets are designed to provide maximum protection from hazardous gas cylinder leaks. When connected to a proper exhaust system, a constant gas flow pattern is achieved, ensuring that leakage does not accumulate. ::: F4000 Vented Cylinder Cabinets Brochure